Products -> PSoCentric -> SAK-PROTO-j1UBL
This example project is the source for the j1UBL installed on our SAK-PROTO. It is a complete Bootloader with options for updates over the microUSB or from the microSD card. It also displays progress and information on the HY28B 2.8" 320x240 LCD. A great starting point to see how we use our components in a real-life situation. But don't be surprised to see that the project design and source code is practically non-existent as it uses a j1UBL-PD (project design) component from j1Pub that containerizes an entire bootloader in one drop-in component!!
All components have been tested on PSoC Creator 3.1 SP2. Most software only components should work on PSoC 4 and PSoC 5LP. Only tested on PSoC 5LP. The hardware oriented components only support PSoC 5LP at this time. We will be enhancing them for PSoC 4 support soon.
All projects offered AS-IS with no warranty expressed or implied. Please use at your own risk.
SAK-PROTO-j1UBL is released as a compressed minimal workspace archive from PSoC Creator. It should be unzipped at a user selected location. It requires our j1Pub Component Library and the location of the library must be added as a dependency.
| Downloads: | |||
| SAK-PROTO-j1UBL v1.0 | 22 Apr 2015 | ZIP | Initial Release |